Category Archives: Polymotion® Hip Resurfacing Device by JointMedica
Polymotion Trial Surgeons and Centers in US
This list from: ClinicalTrials.gov ID NCT06792539, Sponsor JointMedica Inc. Information provided by JointMedica Inc. (Responsible Party)
Last Update Posted February, 26, 2025
1 – Florida Locations – Tampa, Florida, United States, 33613
Recruiting
Florida Medical Clinic Orlando Health
Contact: Eric Border
813-979-0440 eric.border@orlandohealth.com
Principal Investigator: Stephen Raterman, MD
2 – Illinois Locations – Chicago, Illinois, United States, 60612
Not yet recruiting
Rush University Medical Center
Contact: Anne DeBenedetti
312-432-2468 Anne.DeBenedetti@rushortho.com
Principal Investigator: Craig Della Valle, … Read the rest
US Clinical Trials for Polymotion Hip Resurfacing (PHR) System Started
Evaluate the Safety and Effectiveness of the Polymotion Hip Resurfacing (PHR) System Compared to Total Hip Arthroplasty (PHR) – Read Full Study Information Here: https://clinicaltrials.gov/study/NCT06792539?term=polymotion&rank=1
ClinicalTrials.gov ID NCT06792539
Sponsor JointMedica Inc. Information provided by JointMedica Inc. (Responsible Party)
Last Update Posted 2025-02-26
Study Overview
Brief Summary
The goal of this clinical trial is to evaluate the safety and effectiveness of the Polymotion Hip Resurfacing (PHR) System compared to total hip arthroplasty, for adults who require … Read the rest
JointMedica Polymotion Device Discussion at Hip Resurfacing Symposium October 2024
A Hip Resurfacing Symposium was help held back on October 2024 in Chicago. An hour long video of the session if available featuring Dr. Craig Della Valle, Dr. Tom Gross and Dr. Scott Marwin, with Dr. Sharat Kusuma moderating the discussion.
https://vimeo.com/1047765496/9161bdf826
The Biomet Recap Magnum is No Longer Available
Posted on Dr. Gross’s Website and previously used by Dr. Gross
11/22/2024
Alternatives for hip resurfacing
The era of the Biomet Recap/Magnum has come to an end. Zimmer has stopped manufacturing this implant. After nearly 20 years of using this implant for hip resurfacing and posting the best long-term durability outcomes for any type of hip surgery, I will have to change. To continue performing hip resurfacing for all patients is becoming more challenging because … Read the rest
Liz Rae’s PolyMotion Hip Resurfacing 2024
I have a PolyMmtion right hip and it is about 6 months old. I am so far very pleased in that I am basically back to normal and very active again – I am able to start running in July which was my main motivation for resurfacing. I know the device is newer but all devices are new at some stage.
I feel relieved I don’t have to worry about the risk of metalosis.
I … Read the rest
JEL’s Jointmedica Polymotion Hip Resurfacing with Dr Bill Farrington 2023
I’ve benefited greatly from reading posts on this site over the last few years (thanks Pat) so thought I’d pass on my experience.
I had the new Jointmedica Polymotion Hip Resurfacing with Dr Bill Farrington in Auckland NZ about 4.5 months ago and it’s been a life changer. I’m at the stage now where I barely know I’ve had surgery. I’m still protecting it but have been for a few light runs (5-10min) and a … Read the rest
Peggi’s Bilateral Hip Resurfacing Dr. Mackenzie 2022
February 17, 2023
I had bilateral Polymotion hip resurfacing with Dr. Jim MacKenzie in Calgary on Nov 15, 2022. I didn’t realize it at the time, but it was the first Polymotion resurfacing in North America, and Dr. McMinn was in the operating room to observe!!
I am 48 years old, 47 at the time of surgery, and a petite female (5’ 2”, 125 lbs). I was very active up until my 40s when hip … Read the rest
Dr. MacKenzie of Canada Celebrates 20+ Years of Hip Resurfacing Success in Canada
This month, Dr. Jim MacKenzie, an Orthopaedic surgeon specializing in Hip Resurfacing and Knee replacements, was joined by old friends from around the world to celebrate two decades of hip resurfacing.
For one of Dr. MacKenzie’s latest recent surgery, Professor Derek McMinn (godfather of modern Hip Resurfacing), Mr. Roger Ashton (Technical Director at JointMedica), and Dr. Sharat Kusuma (Surgeon, Chief Strategy & Medical Officer of Exactech) observed Dr. MacKenzie perform a bilateral … Read the rest
Exactech Announces FDA Breakthrough Device Designation for JointMedica’s Polymotion® Hip Resurfacing System
PRESS RELEASE May 17, 2022
GAINESVILLE, FLA. (May 17, 2022) – Exactech, a developer and producer of innovative implants, instrumentation, and smart technologies for joint replacement surgery, announced that the U.S. Food and Drug Administration (FDA) has granted a Breakthrough Device Designation for JointMedica’s Polymotion® Hip Resurfacing System.
Exactech, a minority shareholder of JointMedica Limited, is collaborating with the United Kingdom-based orthopaedic device designer and manufacturer to deliver the next generation of hip resurfacing to … Read the rest
Exactech Announces Shareholding Acquisition of JointMedica, Signaling Return of Hip Resurfacing
January 24, 2022 09:00 AM Eastern Standard Time
GAINESVILLE, Fla.–(BUSINESS WIRE)–Exactech, Inc., a developer and producer of innovative implants, instrumentation, and smart technologies for joint replacement surgery, announced the acquisition of a minority interest in JointMedica Limited, a U.K.-based orthopaedic device designer and manufacturer. The companies will collaborate to deliver the next generation of hip resurfacing to the global market with JointMedica’s primary product, the Polymotion® hip implant.
“Both Exactech and JointMedica fundamentally understand
Metal-on-Polyethylene Hip Resurfacing Implant May Improve Resurfacing Arthroplasty Outcomes 2020
New alternatives to Metal-on-Metal Hip Resurfacing by JointMedica 2020
Hip Resurfacing remains an excellent procedure. Prof McMinn and Mr Ronan Treacy’s previous design the BIRMINGHAM HIP™ Resurfacing (BHR™) (1) proudly demonstrates an ODEP 13A* rating in the UK. (2)
Restrictions in size range and gender application in many countries relating to Metal on Metal Hip Resurfacing, limit the use of these implants to males, and component sizes from 48 to 62mm only.
JointMedica and others, are exploring alternative materials to Metal on Metal
Preliminary Report Clinical Experience with Metal-on-Highly-Crosslinked-Polyethylene Hip Resurfacing
Read Full Report Here: https://surfacehippy.info/pdf/Preliminary-report-of-clinical-experience-with-metal-on-highly-rossslinked-poly-hip-resurfacing
R. B. C. Treacy, J. P. Holland, J. Daniel, H. Ziaee, D. J. W. McMinn – The McMinn Centre, Birmingham, United Kingdom – Correspondence should be sent to R. B. C. Treacy; email: trea40@aol.com
Objectives
Modern metal-on-metal (MoM) hip resurfacing arthroplasty (HRA), while achieving good results with well-orientated, well-designed components in ideal patients, is contraindicated in women, men with head size under 50 mm, or metal hypersensitivity. These patients currently … Read the rest